NTP Standard Time Server

1. Single BeiDou clock source; 

2. Vacuum fluorescent display (VFD), showing clock source information, signal strength, time, date, and data validity;

3. 1 to 4 mutually independent 10M/100M network ports (each port has an independent MAC address), configurable into different network segments;

4. Built-in webServer, allowing remote configuration of the time server's external timing network parameters, local IP parameters, time source selection, timing network port on/off control, etc., via a browser, and real-time query of the working status of the timing network ports;

5. Can be configured as a secondary network standard time server;

6. One PPS output, one differential B-code output, one TTL B-code output; all these output controls require remote configuration via a browser;

7. Built-in temperature-compensated crystal oscillator, with a time error of no more than 1 second within one year in the absence of a time source;

8. Second service capacity of 8000 times; capable of providing time service to clocks and computers;

9. Mean time between failures (MTBF) >310,000 hours; service life >20 years, no maintenance required under normal use;

10. Built-in network isolation transformer;

11. Complies with RFC2030 (Simple Network Time Protocol (SNTP) Version 4), capable of providing time query services to terminals on the network;

12. The NTP server has an 8-pin configuration terminal interface at the rear, for RS232, RS485, B-code, and PPS signal outputs, as well as a dual-machine redundant heartbeat interface;

13. Features data security authentication and peer time calibration; the server authenticates clock terminals via TCP/IP protocol. If authentication is passed, the time server outputs time; if authentication fails, the clock terminal is illegal and unsafe, and the server cannot provide time service;

14. Power supply: AC220V/300mA.

15. Operating temperature: 0～70℃;

16. 1.5KV electromagnetic isolation;

17. 1U standard chassis